1 confguration ? connector 1: sma male ? connector 2: sma male ? cable type: pe-p142ll features ? 83% v elocity of propagation ? shielding ef fectiveness > 95 db ? maximum vswr is < 1.35:1 to 18 ghz ? minimum bend radius of 1 inch ? operating temperature range of -55 to +125 c ? rohs and reach compliant ? same day shipment of custom lengths ? 100% continuity , hi-pot, and rf tested . description the pe340 series high performance test cables 0.195 inch diameter and 83% phase velocity offer very low loss performance up to 18 ghz. the durable stainless steel connectors and fep jacket provide a cost effective design ideal for test environ - ments where a rugged cable assembly is required. the series is offered with type n, tnc, and sma connectors all rated to 18 ghz. a heavy duty boot provides improved strain relief and adds to the durability of the cable assemblies. these cable assemblies are built using a double shielded fexible cable, providing excellent shielding effectiveness of greater than 95 db. all pe340 cable assemblies are 100% continuity, hi-pot, and rf tested to published specifcations. custom lengths are built to order and shipped same day. electrical specifcations description minimum t ypical maximum units frequency range dc 18 ghz vswr 1.35:1 velocity of propagation 83 % rf shielding 95 db capacitance 25 [82.02] pf/ft [pf/m] . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs PE341-12 PE341-12 rev 1.3 sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs rf cable assemblies technical data sheet PE341-12
2 specifcations by frequency description f1 f2 f3 f4 f5 units frequency 1 2 5 10 18 ghz insertion loss (max.) 0.52 0.56 0.63 0.72 0.82 db power handling (max.) 700 400 300 220 160 watts . electrical specifcation notes: power handling values are calculated based on cable properties. power handling will vary based on the actual vswr of the cable assembly. mechanical specifcations cable assembly length 12 in [304.8 mm] diameter 0.37 in [9.4 mm] . weight 0.0384 lbs [17.42 g] cable cable type pe-p142ll impedance 50 ohms dielectric type ptfe number of shields 3 shield layer 1 silver plated copper tape shield layer 2 aluminum polyester shield layer 3 silver plated copper wire jacket material fep , green jacket diameter 0.195 in [4.95 mm] . repeated minimum bend radius 1 in [25.4 mm] PE341-12 rev 1.3 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs PE341-12 rf cable assemblies technical data sheet PE341-12 sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs
3 connectors description connector 1 connector 2 type sma male sma male specifcation mil-std-348, fig 310-1 mil-std-348, fig 310-1 impedance 50 ohms 50 ohms contact material and plating beryllium copper , gold beryllium copper , gold contact plating specifcation astm-b488 50 in. minimum astm-b488 50 in. minimum dielectric type ptfe ptfe coupling nut material and plating passivated stainless steel passivated stainless steel coupling nut plating specifcation sae-ams-2700 sae-ams-2700 hex size 5/16 inch 5/16 inch torque 8 in-lbs [0.9 nm] 8 in-lbs [0.9 nm] body material and plating passivated stainless steel passivated stainless steel body plating specifcation sae-ams-2700 sae-ams-2700 . environmental specifcations temperature operating range -55 to +125 deg c compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es reach compliant 12/17/2015 plotted and other data notes: ? values at 25c, sea level. PE341-12 rev 1.3 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs PE341-12 rf cable assemblies technical data sheet sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs PE341-12
4 how to order part number confguration: pe341 - xx uu | | | unit of measure: | | cm = centimeters | | = inches | length | base number example: PE341-12 = 12 inches long cable pe341-100cm = 100 cm long cable sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs PE341-12 url: http://www.pasternack.com/sma-male-sma-male-pe-p142ll-cable-assembly-PE341-12-p.aspx PE341-12 rev 1.3 rf cable assemblies technical data sheet sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs PE341-12
5 PE341-12 rev 1.3 sma male to sma male low loss test cable 12 inch length using pe-p142ll coax, rohs PE341-12 cad drawing
|
